西安不銹鋼管，西安不銹鋼板，西安不銹鋼棒，西安304不銹鋼管，西安304不銹鋼板，西安316不銹鋼，西安321不銹鋼，西安2520不銹鋼，西安不銹鋼無縫管，西安銹鋼加工，西安不銹鋼焊管，西安不銹鋼方管，西安不銹鋼管件,西安304不銹鋼板,西安316不銹鋼管,西安316不銹鋼板,西安2520不銹鋼管,西安2520不銹鋼板,西安不銹鋼法蘭,西安不銹鋼角鋼，陜西不銹鋼管，陜西不銹鋼板，
文章詳情
15-5PH不銹鋼的性能和化學成分介紹
日期：2025-09-16 04:13
瀏覽次數：0
摘要：<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:'Times New Roman';"><span lang="EN-US">15-5PH</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">不銹鋼的性能和化學成分介紹</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:'Times New Roman';"><span lang="EN-US">15-5PH</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">不銹鋼屬于馬氏體沉淀與時效硬化不銹鋼，具有高強度和硬度以及優異的耐腐蝕性。化學成分分析是平衡的，可以產生*小的</span><span style="font-family:'Times New Roman';"><span lang="EN-US">δ</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">鐵素體，所以還具有優異的橫向韌性和延展性，以及良好的鍛造性。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:'Times New Roman';"><span lang="EN-US">15-5PH</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">的制造特性和其他沉淀硬化不銹鋼材質相似，</span></span><span style="font-family:'Times New Roman';font-size:small;"> </span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";"><span style="font-size:small;">它們可以通過單步老化硬化，低溫處理。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";"><span style="font-size:small;">該材質不銹鋼可用于閥部件、配件和緊固件、鍛造軸和齒輪、發動機部件、化學工藝設備、造紙設備以及飛機和核反應堆的部件。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<a name="15-5PH不銹鋼"></a><span style="font-size:small;"><span style="font-family:'Times New Roman';"><span lang="EN-US">15-5PH</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">不銹鋼</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">在鍛造時，該不銹鋼材質應均勻加熱至</span><span style="font-family:'Times New Roman';"><span lang="EN-US">1180 /1205</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃，并鍛煉</span><span style="font-family:'Times New Roman';"><span lang="EN-US">1</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">小時。為了獲得*佳的晶粒尺寸和機械性能，鍛造材料應在進一步加工之前將其風冷至</span><span style="font-family:'Times New Roman';"><span lang="EN-US">32</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃以下。硬化前必須對該不銹鋼材料進行固溶處理。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";"><span style="font-size:small;">熱處理</span></span><span lang="EN-US"><br />
<span style="font-family:'Times New Roman';font-size:small;"> 15-5PH</span></span><span style="font-size:small;"><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">一般在溶液處理條件中提供，可以通過將溶液處理的材料加熱至</span><span style="font-family:'Times New Roman';"><span lang="EN-US">480</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃至</span><span style="font-family:'Times New Roman';"><span lang="EN-US">620</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃的溫度并硬化</span><span style="font-family:'Times New Roman';"><span lang="EN-US">1-4</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">小時，具體取決于溫度，然后空氣冷卻。</span><span lang="EN-US"><span style="font-family:'Times New Roman';"> </span></span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">在</span><span style="font-family:'Times New Roman';"><span lang="EN-US">1040</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃</span><span style="font-family:'Times New Roman';"><span lang="EN-US">+/-14</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃的溫度下加熱</span><span style="font-family:'Times New Roman';"><span lang="EN-US">1-2</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">小時，冷卻至</span><span style="font-family:'Times New Roman';"><span lang="EN-US">32</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">℃以下，從而完全轉化為馬氏體。但此時材料由于韌性較差，沖擊強度差，應力腐蝕開裂敏感，材料不能用于溶液處理條件。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:'Times New Roman';"><span lang="EN-US">15-5PH</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">不銹鋼切削加工性較好，在溶液處理和各種老化硬化條件下都容易加工。當以與</span><span style="font-family:'Times New Roman';"><span lang="EN-US">302</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">不銹鋼和</span><span style="font-family:'Times New Roman';"><span lang="EN-US">304</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">不銹鋼相似的方式對材料機械進行固溶處理時，隨著硬化溫度的升高，加工性提高。*佳切削性從條件</span><span style="font-family:'Times New Roman';"><span lang="EN-US">1150M</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">獲得。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span style="font-size:small;"><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">該材料的焊接性也非常不錯，可以通過屏蔽熔接和電阻焊接工藝獲得令人滿意地焊接效果。因為碳吸收的可能性，不推薦采用氧乙炔焊接。焊接接頭應設計成*小化應力。在溶液處理條件下的焊接通常是令人滿意的，但是如果預期焊接應力很高，*好在</span><span style="font-family:'Times New Roman';"><span lang="EN-US">H1150</span></span><span style="font-family:宋體;mso-ascii-font-family:"Times New Roman";mso-hansi-font-family:"Times New Roman";">焊接過時的狀態，焊接前通常不需要進行預熱。</span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
<p style="margin:0cm 0cm 0pt;">
<span lang="EN-US"><span style="font-family:'Times New Roman';font-size:small;"> </span></span>
</p>
<span style="font-family:宋體;font-size:small;"> </span>
15-5PH不銹鋼的性能和化學成分介紹
15-5PH不銹鋼屬于馬氏體沉淀與時效硬化不銹鋼，具有高強度和硬度以及優異的耐腐蝕性。化學成分分析是平衡的，可以產生*小的δ鐵素體，所以還具有優異的橫向韌性和延展性，以及良好的鍛造性。
15-5PH的制造特性和其他沉淀硬化不銹鋼材質相似， 它們可以通過單步老化硬化，低溫處理。
該材質不銹鋼可用于閥部件、配件和緊固件、鍛造軸和齒輪、發動機部件、化學工藝設備、造紙設備以及飛機和核反應堆的部件。
在鍛造時，該不銹鋼材質應均勻加熱至1180 /1205℃，并鍛煉1小時。為了獲得*佳的晶粒尺寸和機械性能，鍛造材料應在進一步加工之前將其風冷至32℃以下。硬化前必須對該不銹鋼材料進行固溶處理。
熱處理
15-5PH一般在溶液處理條件中提供，可以通過將溶液處理的材料加熱至480℃至620℃的溫度并硬化1-4小時，具體取決于溫度，然后空氣冷卻。
在1040℃+/-14℃的溫度下加熱1-2小時，冷卻至32℃以下，從而完全轉化為馬氏體。但此時材料由于韌性較差，沖擊強度差，應力腐蝕開裂敏感，材料不能用于溶液處理條件。
15-5PH不銹鋼切削加工性較好，在溶液處理和各種老化硬化條件下都容易加工。當以與302不銹鋼和304不銹鋼相似的方式對材料機械進行固溶處理時，隨著硬化溫度的升高，加工性提高。*佳切削性從條件1150M獲得。
該材料的焊接性也非常不錯，可以通過屏蔽熔接和電阻焊接工藝獲得令人滿意地焊接效果。因為碳吸收的可能性，不推薦采用氧乙炔焊接。焊接接頭應設計成*小化應力。在溶液處理條件下的焊接通常是令人滿意的，但是如果預期焊接應力很高，*好在H1150焊接過時的狀態，焊接前通常不需要進行預熱。
